3/13/2021 0 Comments Powder Coating Equipment BasicsPowder coating is a wet finishing technique in which rough, free flowing, thermoset or thermoplastic powder substance is applied to a solid surface, typically by dropping or rolling it on a hand-held device. The term powder comes from the mixing of a coarse flour with a liquid powder such as cement powder to create a hard, tough, and consistent paste. This wet finishing technique is quite versatile and can be used on many different kinds of surfaces including metal and wood. There are many reasons why businesses choose to use powder coating equipment such as Powder Coating Gun to complete their projects. One of these is that powder coating operations can save a company a lot of money, time, and energy compared to traditional methods. Another reason is that these operations can help companies improve the appearance of their products or enhance the functionality of their products. However, if using powder coating equipment incorrectly, products can be damaged, or in some cases, completely destroyed. Here is what you need to know about using this type of finishing method: Powder coating is a wet duster application stage. To create a smooth, gloss finish, the powder coating materials are brushed on to the surface to be coated, rather than rolled. The applications are also more intense than other types of applications because they are applied in small, controlled bursts, rather than in long, continuous strips. Because of the extreme heat generated during these applications, safety precautions must be observed at all times. One important aspect of any powder coating process is the preparation of the surface to be coated. Most surfaces can be prepared for the application process without damaging them, but some materials require specific preparation steps. For example, steel and copper must be prepared by rubbing them down with a fine grit abrasive material that has been specially treated to resist abrasive attack. In addition, a clear lacquer must be applied over the surface to protect it from deposits created by the curing stage. Once the protective layer has been added, it can be peeled off to expose the newly coated metal. From spraying, coating, curing, dust collection, and more, our Automated Finishing System can handle any finishing task with utmost efficiency while saving cost. Another advantage of using powders is that they create a faster turnaround time than conventional liquid coating methods. This is because there are no heat cycles or curing stages to slow down the process. In fact, even with the slower drying time, the coating materials can dry in as little as one hour. Because of this, powder coatings can provide a higher production rate than other types of coatings. Powder coating equipment includes various types of brushes and feed conveyors, as well as buffing facilities. Abrasives, oxides, clear coats, and even metal stencils can be pigmented on a substrate, which allows them to be coated on several layers of substrate in a short period of time. The process also allows for very rapid application of a large number of coatings without concern for substrate flow or slippage. Furthermore, because of the speed of the coating process, there is no need to clean wash stations between applications. This post https://en.wikipedia.org/wiki/Powder_coating elaborate more on the topic, so you may need to check it out.
0 Comments
Leave a Reply. |
ArchivesCategories |